Core Drill
Automatic Feeding System
Options for Core Drill
Hand Cutter
Wall Cutter
Plunge Cutter
Wire Saw
Options for Wire Saw
Hydraulic Unit

Contact

Mail

 

Product・Technical Information＞ ＞Hydraulic Unit＞E-1114Ax
Hydraulic Unit E-1114Ax

■ Compact Design: Width 701mm
■ Accurate discharge amount can be set by labeled "Discharge amount and scale table"
■ The pressure adjustment knob is equipped front side so that pressure adjustment is easy
■ "Reversal prevention relay" is built in the power supply box so that reversal of the electric motor doesn’t happen due to the wrong wiring
■ The hour meter shows the time to do maintenance
■ 5/8" hydraulic hose 20m (Low pressure drop type) is standard accessory
■ The machine is not certificated CE marking
■ RoHS regulation is not applied
■ UL standard is not obtained

Applications
■ Compact Hydraulic Wire Saw DSM series
■ Hydraulic Core Drill SPU series
■ Hydraulic Wall Cutter CHW series
■ Hydraulic Plunge Cutter PCH-48V




Specifications
Model E-1114Ax
Power supply 3-phase 400 50/60HzCommercial power source over 25A
Electric Motor Three(3)-phase induction motor 11Kw 4P
Hydraulic pump Variable capacity piston pump
Rated pressure 21MPa
Discharge Amount 50Hz Setting range 23.0～42.2ℓ/min
60Hz Setting range 27.7～50.7ℓ/min
Coupler Discharge NITTO KOHKI Flat Face Cupla 1/2” Plug
Return NITTO KOHKI Flat Face Cupla 1/2” Socket
Oil cooler Water cooling
Oil tank capacity 57 litter
Hydraulic actuation oil Mineral abrasion resistance actuation oil ISO-VG46
Size W×L×H 701×1,090×760mm
Weight (Excluded Code) 310kg
Standard Accessories Hydraulic Hose 5/8” Assy.
FF Plug and Socket 20m (2)
Single-ended Spanner 13mm (1)
Hex. Bar wrench 2mm(1)
Instruction Manual (1)